"4WD LOW" Switch Inspection

WARNING: This page is about a different car, the 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative cable at battery.
Disconnect "4WD LOW" switch coupler (2).

Fig 1: Disconnecting "4WD LOW" Switch Coupler
Courtesy of SUZUKI OF AMERICA CORP.
Check continuity between "4WD LOW" switch terminals. If not, replace "4WD LOW" switch.
"4WD LOW" switch specifications
1. Transfer lever "4L" position: Continuity
2. Transfer lever "4H", "2H" position: No continuity
Connect "4WD LOW" switch coupler and battery negative cable.