Stop Light Switch
WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the stop light switch connector.
- Screw in the stop light switch until its threads contact the stopper, and fix the stop light switch by turning it approximately 1/4 turn clockwise. See Fig 1 .
- The clearance should be 0.02-0.04" (0.5-1.0 mm). Adjust as necessary.
- Reconnect stop light switch connector.
- Check proper operation of key-lock and shift interlock systems.
CAUTION:
Check that the stop lights do not illuminate when the brake pedal is not depressed.