DTCS P0107 Or P0108: Map Sensor CIRCIUT - Low Input/High Input: Condition
WARNING: This page is about a different car, the 2003 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0107 is set when after engine is at normal operating temperature and ignition is on, engine not running, less than .02 volts is detected for more than a predetermined time by ECM. MIL is illuminated when ECM detects malfunction during 2 consecutive drive cycles.
DTC P0108 is set when after engine is at normal operating temperature and engine idling, more than 4.6 volts is detected for more than a predetermined time by ECM. MIL is illuminated when ECM detects malfunction during 2 consecutive drive cycles.