DTC Confirmation Test
WARNING: This page is about a different car, the 2003 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off, connect scan tool and turn ignition on. Using scan tool, clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. Ensure engine coolant temperature is 86°F (30°C) or less when engine is first started. Start engine and allow engine coolant temperature to increase to 167-230°F (75-110°C) and intake air temperature to increase to 140°F (60°C). Drive vehicle at speeds of more than 35 MPH for 3 minutes or more. Stop vehicle and allow engine to idle for 3 minute or more. Using scan tool, check for current or pending DTC P0111. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. If DTC resets, go to DIAGNOSIS & REPAIR PROCEDURE .