DTC Confirmation Test
WARNING: This page is about a different car, the 2003 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition switch to LOCK position. Connect SUZUKI scan tool or equivalent to DLC. See Figure . Turn ignition switch to ON position. Using scan tool, clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. Ensure engine coolant temperature is less than 86°F (30°C) at start up. Start engine and warm to 176-230°F (80-110°C). Drive vehicle at more than 35 MPH for 3 minutes or more. Stop vehicle and allow engine to idle for 3 minutes or more. Using scan tool, check for current or pending DTC. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. If DTC P2025 resets, go to DIAGNOSIS & REPAIR PROCEDURE .