LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2002 >> XL-7 Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Removal & Installation) >> Computerized Engine Controls >> Engine Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module: Installation

WARNING: This page is about a different car, the 2003 Suzuki XL-7, 2003 Suzuki Vitara, 2003 Suzuki Grand Vitara, and 2003 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reverse removal procedure noting the following:
    • Connect connectors securely to ECM until a click is heard.
    • Be careful not to catch any cable or wiring harness when installing each part.
    • Securely tighten body earth bolt.
Fig 1: Removing Instrument Panel Passenger (Aerio)
G00220988Courtesy of SUZUKI OF AMERICA CORP.
Fig 2: Removing Ground Wire Harness (Aerio)
G00220989Courtesy of SUZUKI OF AMERICA CORP.
Fig 3: Removing ECM (Aerio)
G00220990Courtesy of SUZUKI OF AMERICA CORP.


  1. Install ECM (PCM) with bracket to vehicle.
  2. Connect connectors to ECM (PCM) securely.
  3. Install ECM (PCM) cover to bracket.
  4. Enable air bag system (if equipped) referring to "Enabling Air Bag System: " .
  5. Connect negative cable to battery.
Fig 1: Identifying Engine Control Module (ECM) Cover (Grand Vitara, Vitara & XL-7)
G00174106Courtesy of SUZUKI OF AMERICA CORP.
Fig 2: Removing ECM (PCM) (Grand Vitara, Vitara & XL-7)
G00174107Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals