Idle Air Control Valve: Installation
WARNING: This page is about a different car, the 2003 Suzuki XL-7, 2003 Suzuki Vitara, 2003 Suzuki Grand Vitara, and 2003 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
For installation, reverse removal procedure and use a new gasket (1). See Figure .
- Install new "O" ring to throttle body.
- Install IAC valve to throttle body. Tighten IAC valve screws to specified torque. See Fig 1 and TORQUE SPECIFICATIONS .
- Connect IAC valve connector securely.
- Connect negative cable to battery.