LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2002 >> XL-7 Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Removal, Overhaul & Installation) >> Torque Specifications >> Outlander
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications: Outlander

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Mitsubishi Outlander, 2003 Mitsubishi Montero Sport, 2003 Mitsubishi Montero, 2003 Mitsubishi Lancer, and 2003 Mitsubishi Galant. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (OUTLANDER)

Applications Ft. Lbs. (N.m)
Center Exhaust Pipe
Bolts 30-37 (40-50)
Nuts 36-51 (49-69)
Crankshaft Pulley Bolts 15-22 (21-30)
Differential Dynamic Damper Nuts (1) 26-39 (35-53)
Differential Mount Bracket-To-Body Bolts 44-59 (60-80)
Differential Mount Bracket-To-Differential Bolts 59-74 (80-100)
Differential Support Arm Bolts/Nuts 59-74 (80-100)
Drive Belt Auto Tensioner Bolt
M8 13-19 (18-26)
M10 25-40 (34-54)
Drive Belt Idler Pulley Bolt 55-62 (74-84)
Drive Shaft Flange-To-Rear Differential Nuts 22-25 (30-34)
Drive Shaft Insulator Nut 19-25 (26-34)
Drive Shaft Insulator Heat Protector Nut 8-11 (11-15)
EGR Solenoid Bolts (2)
Engine Front Mounting Bracket
Bolt 25-40 (34-54)
Nut
With Flange (3) 49-55 (66-74)
With Washer 25-40 (34-54)
Engine Coolant Temperature Sensor 21 (19-29)
Fuel Tank Mounting Nuts 16-22 (22-30)
Heated Oxygen Sensor 32 (44)
Knock Sensor 15-18 (21-25)
Power Steering Pump Bolt 13-19 (18-26)
Power Steering Pressure Switch 19-22 (26-30)
Power Steering Pump Bracket Bolt 30-43 (40-58)
Spark Plugs 14-22 (20-30)
Throttle Body Bolts 12-15 (16-21)
Timing Belt Tensioner Pulley Fixing Bolt 32-39 (43-53)
INCH Lbs. (N.m) 
Accelerator Cable Bolts 35-53 (4-6)
Camshaft Position Sensor Bolt 69-87 (7.8-9.8)
Crankshaft Position Sensor Bolts 69-87 (7.8-9.8)
Fuel Pressure Regulator Bolts 62-96 (7.0-10.8)
Fuel Pump Module Nuts 19-26 (2.1-2.9)
Fuel Rail Bolts 89-106 (10-12)
Fuel Temperature Sensor Bolts 19-26 (2.1-2.9)
High Pressure Fuel Line-To-Fuel Rail Retaining Bolts 35-53 (4-6)
Idle Air Control Motor Bolts 13-22 (1.5-2.5)
Ignition Coil Bolts 71-106 (8-12)
Lower Timing Belt Cover Bolts
With Flange 89-106 (10-12)
With Washer 71-106 (8-12)
Manifold Differential Pressure Sensor Bolt 35-53 (4-6)
Power Steering Pressure Hose Bolts 89-124 (10-14)
Throttle Body Cruise Control Lever Assembly Bolts 35-53 (4-6)
Throttle Position Sensor Bolts 13-22 (1.5-2.5)
Transaxle Control Cable Adjusting Nut (A/T) 89-124 (10-14)
Upper Timing Belt Cover Bolts
M6 89-106 (10-12)
M8 (4)
Water Pump Pulley Bolts 69-87 (7.8-9.8)
(1) When installing component use NEW bolts/nuts.
(2) Information is not available from manufacturer.
(3) This bolt/nut should be initially tightened, and then fully tightened after placing vehicle horizontally and loading full weight of engine on vehicle body.
(4) Tighten to 10-11 Ft. Lbs. (13-15 N.m).