Desiccant Removal and Installation: Installation
WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
Reverse removal sequence to install desiccant, according to instruction manual with supply parts.
NOTE:
- When replacing desiccant, add 40 cc of refrigerating oil the same as compressor oil.
- Do not remove desiccant from the plastic bag until just before inserting it into the receiver/dryer.
- Install desiccant (1) with its double-layer portion facing the bottom of the receiver/dryer.
- If desiccant cap installing is bolt type, tighten specified torque for its bolt.
Tightening torque
Cap: 12.5 N.m (1.25 kg-m, 9+/-1.8 lb-ft)