DTC P1450 Or DTC P1451: Condition
WARNING: This page is about a different car, the 2002 Suzuki Esteem. However, it is still accessible from the selected car via links, so may be relevant.
DTC P1450 is set when Engine Control Module (ECM) detects that barometric pressure sensor output voltage is less than 0.1 volts or more 5.1 volts. DTC P1451 is set when barometric pressure calculated using Manifold Differential Pressure (MDP) sensor does not match barometric pressure sensor output voltage. MIL is illuminated when ECM detects malfunction during 2 consecutive drive cycles. Possible causes are:
- Barometric pressure sensor malfunction.
- MDP sensor malfunction.