DTC Confirmation Test
WARNING: This page is about a different car, the 2002 Suzuki Esteem. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off, connect scan tool and turn ignition on. Using scan tool, clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. Ensure fuel tank is at least 1/4 full, vehicle is at an altitude of 8000 feet or below, barometric pressure is 75 kPa or more, ambient temperature is 14°F (-10°C) or more, intake air temperature is 158°F (70°C) or less, and engine coolant temperature 158-230°F (70-110°C). Start engine and allow it to reach normal operating temperature. Allow engine to idle for 2 minutes. Using scan tool, check for current or pending DTC P0506 or P0507. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. If DTC resets, go to DIAGNOSIS & REPAIR PROCEDURE .