Rear Wheel Speed Sensor Removal and Installation: Installation

WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Check that no foreign material is attached to sensor and rotor.
Install it by reversing removal procedure.
CAUTION: Do not pull wire harness or twist more than necessary when installing rear wheel speed sensor.

Tightening torque

Rear wheel speed sensor bolt (a): 21 N.m (2.1 kg-m, 15.5 lb-ft)

Fig 1: Tightening Bolt With Torque Specification
Courtesy of SUZUKI OF AMERICA CORP.
Check that there is no clearance between sensor (1) and knuckle.

Fig 2: Checking Clearance Between Sensor And Knuckle
Courtesy of SUZUKI OF AMERICA CORP.