LSPV Assembly Removal and Installation: Removal

WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Clean around reservoir cap and take out fluid with syringe or such.
Hoist vehicle.
Disconnect brake pipes (2) from LSPV assembly (1).

Fig 1: Disconnecting Brake Pipes From LSPV Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Remove LSPV assembly (1) with spring (2) from vehicle body.
Remove spring (2) from lever (5).

CAUTION: LSPV assembly must not be disassembled. Replace with new one if defective.

Fig 2: Removing Spring From Lever

Courtesy of SUZUKI OF AMERICA CORP.