DTC Confirmation Test
WARNING: This page is about a different car, the 2002 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
Ensure engine coolant temperature is at engine start, between 86°F (30°C). Turn ignition switch to LOCK position. Connect SUZUKI scan tool or equivalent to DLC, located below left side of instrument panel. See Figure . Turn ignition switch to ON position. Using scan tool, Using scan tool, clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. Start engine and allow it to reach normal operating temperature. Drive vehicle at more than 35 MPH for 3 minutes or more. Stop vehicle and let engine idle for 3 minutes or more. Using scan tool, check for current or pending DTC. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. If same DTC P0111 resets, see DIAGNOSIS & REPAIR PROCEDURE .