G Sensor Removal And Installation: Removal

WARNING: This page is about a different car, the 2003 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch to "OFF" position and disconnect battery negative cable.
Remove rear center console box.
Remove parking brake lever bolts (rear side) (3) and G sensor (2) with bracket from floor.
NOTE: Loosen only bolt (front side) (4).
Remove sensor (2) with bracket from floor.
Disconnect connector from sensor (2).

CAUTION:

Do not separate sensor (2) and bracket (5). It will lead to erroneous assembly.
Sensor must not be dropped or shocked. It will affect its original performance.

Fig 1: Removing G Sensor With Bracket From Floor
Courtesy of SUZUKI OF AMERICA CORP.