Front Wheel Speed Sensor Removal And Installation: Removal

WARNING: This page is about a different car, the 2003 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative cable from battery.
Hoist vehicle and remove wheel.
Disconnect front wheel speed sensor connector (1).

Fig 1: Disconnecting Front Wheel Speed Sensor Connector
Courtesy of SUZUKI OF AMERICA CORP.
Remove harness clamp bolts (2) and sensor bolt (3) and remove front wheel speed sensor (1) from knuckle.

CAUTION:

Do not pull wire harness when removing front wheel speed sensor.
Do not cause damage to surface of front wheel speed sensor and do not allow dust, etc. to enter its installation hole.

Fig 2: Removing Front Wheel Speed Sensor From Knuckle
Courtesy of SUZUKI OF AMERICA CORP.