Front Wheel Speed Sensor Removal And Installation: Installation

WARNING: This page is about a different car, the 2003 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Check sensor rotor referring to Front Wheel Speed Sensor Rotor On-Vehicle Inspection .
Install it by reversing removal procedure.
CAUTION:
- Do not pull wire harness or twist more than necessary when installing front wheel speed sensor.
- Fit harness grommet to inner fender securely.
Tightening torque
1. Wheel speed sensor clamp bolt (a): 10 N.m (1.0 kg-m, 7.5 lb-ft)
2. Front wheel speed sensor bolt (b): 23 N.m (2.3 kg-m, 17.0 lb-ft)
  
  Fig 1: Installing Front Wheel Speed Sensor
  Courtesy of SUZUKI OF AMERICA CORP.
Check that there is no clearance between sensor and knuckle.

Fig 2: Checking That There Is No Clearance Between Sensor & Knuckle
Courtesy of SUZUKI OF AMERICA CORP.