Instrument Panel Removal And Installation: Installation

WARNING: This page is about a different car, the 2003 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Install instrument panel by reversing removal procedure, noting the following items.

When installing each part, be careful not to catch any cable or wiring harness.
Tighten instrument panel bolt to specified torque.

Tightening torque
1. Instrument panel bolt (a): 23 N.m (2.3 kg-m, 17.0 lb-ft)
  - When installing steering column assembly, refer to INSTALLATION , Steering Column And Wheel.
  - Adjust control cables, refer to INSTALLATION , Heater And Ventilation.
  - Enable air bag system, refer to DISABLING & ACTIVATING AIR BAG SYSTEM , Air Bag Restraint Systems.