LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2002 >> XL-7 Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 142 (Overhaul) >> Intake Manifold >> Removal And Installation >> Installation Service Points >> >> A << Intake Manifold Stay Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> A << Intake Manifold Stay Installation

WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the intake manifold stay and tighten the bolts just finger tight.
  2. Check to ensure that the stay is in close contact with the bosses of the intake manifold and cylinder block.
  3. First tighten the intake manifold side bolts to the specified torque, then the cylinder block side bolts to the specified torque.
    1. Tightening torque: 31 +/- 3 N.m (23 +/- 2 ft-lb) 
scientia non olet · About LEMON Manuals