>> D << O-Ring/Fuel High Pressure Hose Installation
WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not let any engine oil get into the delivery pipe.
- Apply a small amount of new engine oil to the O-ring.
- Turning the fuel high-pressure hose to the right and left, install it to the delivery pipe, while being careful not to damage the O-ring. After installing, check that the hose turns smoothly.
- If the hose does not turn smoothly, the O-ring is probably being clamped. Disconnect the fuel high-pressure hose and check the O-ring for damage. After this, re-insert it to the delivery pipe and check that the hose turns smoothly.
- Tighten the fuel high pressure hose mounting bolts to the specified torque.
- Tightening torque: 5.0 +/- 1.0 N.m (44 +/- 9 in-lb)