DTC Confirmation Test
WARNING: This page is about a different car, the 2002 Suzuki Esteem. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off, connect scan tool and turn ignition on. Using scan tool, clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. Start engine and shift transmission into Drive. Drive vehicle at speeds of more than 20 MPH and stop vehicle. Repeat drive and stop procedure 9 more times. Shift transmission into 2nd gear and repeat drive and stop procedure 5 more times. Shift transmission into 1st gear and repeat drive and stop procedure 5 more times. Using scan tool, check for current or pending DTC P1717. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. If DTC resets, go to DIAGNOSIS & REPAIR PROCEDURE .