DTC Confirmation Test
WARNING: This page is about a different car, the 2002 Suzuki Esteem. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition off, connect scan tool and turn ignition on. Using scan tool, clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. Ensure fuel tank is 1/4-3/4 full, vehicle is at an altitude of 8000 feet or below, barometric pressure is 75 kPa or more, ambient temperature is 14°F (-10°C) or more, intake air temperature is 158°F (70°C) or less, and engine coolant temperature is 158-230°F (70-110°C). Drive vehicle at speeds of 30-40 MPH under all driving conditions (stop and go, high and low load, or rapid acceleration and deceleration) for 20 minutes. Go to, next step.
- Drive vehicle at speeds of 30-40 MPH with throttle steady for 3 more minutes. Stop vehicle. Leave ignition on and confirm test results. See TEST RESULT CONFIRMATION FLOW .