Cooling Fan/Generator Belt Removal and Installation: Installation
WARNING: This page is about a different car, the 2003 Suzuki XL-7 and 2003 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
- Install belt to water pump pulley, crankshaft pulley and generator pulley. Install P/S pump drive belt.
- Adjust belt tension as specified.
For adjustment of P/S pump drive belt tension, refer to P/S PUMP DRIVE BELT INSPECTION AND ADJUSTMENT .
For adjustment of cooling fan belt tension, refer to COOLING FAN/GENERATOR BELT TENSION CHECK AND ADJUSTMENT .
- Tighten adjusting bolt and pivot bolt.
- Connect negative cable at battery.