Removal & Installation (2.2L)
WARNING: This page is about a different car, the 2002 Isuzu Trooper, 2002 Isuzu Rodeo Sport, 2002 Isuzu Rodeo, 2002 Isuzu Axiom, and 2002 Honda Passport. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Disconnect air cleaner duct from throttle body. Disconnect TP sensor and IAC valve harness connectors. Disconnect accelerator cable from throttle lever. Disconnect vacuum hoses.
- Drain cooling system. Disconnect coolant lines. Remove 4 throttle body-to-intake manifold and remove throttle body from manifold. If replacing throttle body remove TP sensor and IAC valve from throttle body.
- To install, reverse removal procedure. Replace gaskets as necessary. Tighten bolts to specification. See TORQUE SPECIFICATIONS .