LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2002 >> XL-7 Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Controls - Removal, Overhaul & Installation) >> Fuel System >> Accelerator Cable >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page is about a different car, the 2002 Isuzu Trooper, 2002 Isuzu Rodeo Sport, 2002 Isuzu Rodeo, 2002 Isuzu Axiom, and 2002 Honda Passport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect air cleaner duct from throttle body. Loosen adjusting nut on throttle body cable bracket. Remove cable clip. Remove accelerator cable from throttle lever.
  2. Working under dash inside of vehicle, remove cable from accelerator pedal. Push rubber grommet through firewall, and pull accelerator cable through firewall.
  3. Check cable for ease of movement, kinks or bends and damage to cable housing. Replace as necessary. To install, reverse removal procedure. After installing cable to throttle body, adjust cable. See ACCELERATOR CABLE ADJUSTMENT .
scientia non olet · About LEMON Manuals