Input Shaft Disassembly & Assembly: Assembly

WARNING: This page is about a different car, the 2003 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.

When installing bearing (1), bring it so that its groove for circlip is in the front and press-fit with special tool and press.
Special tool

(B): 09925-18011

Fig 1: Installing Input Shaft Bearing
Courtesy of SUZUKI OF AMERICA CORP.
After fitting circlip (1), air-blow lubrication oil hole (2).

Fig 2: Identifying Input Shaft Circlip & Lubrication Oil Hole
Courtesy of SUZUKI OF AMERICA CORP.