LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2002 >> XL-7 Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Engine Cooling System) >> Repair Instructions >> Cooling Fan/Generator Belt Removal & Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cooling Fan/Generator Belt Removal & Installation: Installation

WARNING: This page is about a different car, the 2004 Suzuki XL-7 and 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install belt to water pump pulley, crankshaft pulley and generator pulley. Install P/S pump drive belt.
  2. Adjust belt tension as specified.

    For adjustment of P/S pump drive belt tension, refer to P/S PUMP DRIVE BELT INSPECTION AND ADJUSTMENT .

    For adjustment of cooling fan belt tension, refer to COOLING FAN/GENERATOR BELT TENSION CHECK & ADJUSTMENT  .

  3. Tighten adjusting bolt and pivot bolt referring to COOLING FAN/GENERATOR BELT TENSION CHECK & ADJUSTMENT  .
  4. Connect negative cable at battery.
scientia non olet · About LEMON Manuals