LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2002 >> XL-7 Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Exterior Trim) >> Repair Instructions >> Front Fender Removal & Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Fender Removal & Installation: Installation

WARNING: This page is about a different car, the 2004 Suzuki XL-7 and 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove pad (3) from side body (1) and (or) fender (2), using care not to damage painted surface.
    Fig 1: Removing Pad From Side Body &/Or Fender
    G01356744Courtesy of SUZUKI OF AMERICA CORP.
  2. Attach new pad (2) cutting appropriately size temporarily and adjust height with a knife (3) so that fender becomes flush with side body (1).
    Fig 2: Adjusting Height With A Knife
    G01356745Courtesy of SUZUKI OF AMERICA CORP.
  3. Install front fender.
    NOTE: If paint on fender bolt is peeled off, be sure to apply paint again.
  4. Install front fender lining.
  5. Install front bumper.
scientia non olet · About LEMON Manuals