LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2002 >> XL-7 Plus >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0101: Mass Air Flow Sensor - Performance Problem >> Diagnosis & Repair Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis & Repair Procedure

  1. If engine system check has been performed, go to next step. If engine system check has not been performed, go to A4: ENGINE SYSTEM CHECK  under SYSTEM TESTS.
  2. Check MAF sensor and air intake system for blockage. Check for intake system air leaks. If problem is found, repair as necessary. After repair, repeat DTC CONFIRMATION TEST . If no problem is found, go to next step.
  3. Start engine and allow it to reach normal operating temperature. Using scan tool, in DATA LIST mode compare MAF SENSOR parameter at idle and at 2500 RPM to specified values. See MASS AIR FLOW SENSOR STANDARD VALUES  table. If MAF sensor values are not as specified, replace MAF sensor. After repair, repeat DTC CONFIRMATION TEST . If MAF sensor values are as specified, problem is probably intermittent. See INTERMITTENTS in TROUBLE SHOOTING - NO CODES article.
MASS AIR FLOW SENSOR STANDARD VALUES

Application Grams/Sec.
At Idle 2.6-4.5
At 2500 RPM 10.0-16.0
scientia non olet · About LEMON Manuals