Hazard Warning Switch

Disconnect hazard warning switch connector. See HAZARD WARNING SWITCH under REMOVAL & INSTALLATION. Using DVOM, check for continuity between switch terminals with switch in specified position. See HAZARD WARNING SWITCH CONTINUITY table. If continuity is not as specified, replace hazard warning switch.

HAZARD WARNING SWITCH CONTINUITY

Switch Position

⁽¹⁾ Continuity Between Terminals No.

OFF

4 & 5; 6 & 8

1, 2 & 3; 4 & 5; 7 & 8

⁽¹⁾

See Fig 1

Fig 1: Identifying Hazard Warning Switch Terminals

Courtesy of SUZUKI OF AMERICA CORP.