Vitara, Grand Vitara & XL-7 - Transmission Range Sensor (Shift Switch) Circuit Check
- Disconnect connector from cruise control module with ignition switch off.
- Check for proper connection to cruise control module at terminal E132-9.
- If ok, connect ohmmeter between terminal E132-9 and ground.
- Check for continuity under each condition shown in illustration below. See Fig 1
Courtesy of SUZUKI OF AMERICA CORP.
- Disconnect transmission range switch connector.
- Check for proper connection to transmission range switch at disconnected connector terminal.
- If ok, check transmission range switch for operation referring to "Transmission Range Switch (Sensor) Inspection:".
- If check results satisfactory, Black/Red or Black/Yellow circuit is open or short
- If check results unsatisfactory, adjust or replace.