Rear Mounting For Front Differential Carrier Replacement

Removal
1. Lift up vehicle and remove rear mounting bracket (3) by removing rear mounting bolt (1) and rear mounting bracket bolts (2).
2. Check mounting rubber for damage or deterioration and replace as necessary.

Installation





1. Tighten rear mounting bolts (1) and rear mounting bracket bolts (2) to specified torque for reinstallation.
Tightening torque
Rear mounting bolt (a): 85 Nm (8.5 kgf-m, 61.5 ft. lbs.)
Rear mounting bracket bolts (b): 50 Nm (5.0 kgf-m, 36.5 ft. lbs.)