Diagnosis & Repair Procedure
- If engine system check has been performed, go to next step. If engine system check has not been performed, go to A4: ENGINE SYSTEM CHECK under SYSTEM TESTS.
- If during DTC CONFIRMATION procedure DTC P1451 was also retrieved, go to next step. If no other DTCs were retrieved, substitute a known good ECM, and repeat appropriate DTC CONFIRMATION procedure. If DTC does not reset, testing is complete.
- Check MAP sensor operation. See DTC P0107 OR DTC P0108 . If MAP sensor does not test as specified, replace MAP sensor. If MAP sensor tests as specified, substitute a known good ECM, and repeat appropriate DTC CONFIRMATION procedure. If DTC does not reset, testing is complete.