PCM (Customer Supplied 2 Or More Valid Keys)
WARNING: This page does not describe the selected car, but rather 162 other vehicles, including the 2001 Volvo V70, 2001 Volvo V40, 2001 Volvo S80, 2001 Volvo S60, and 2001 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When customer does not supply any valid keys, immobilizer unit must also be replaced.
- Cut new transponder equipped key(s), if necessary. Replace PCM. Using valid 1st key, turn ignition to ON position. SECURITY light should illuminate for 1-2 seconds. Turn valid key to LOCK position.
- Using valid 1st key, turn ignition to ON position, then to LOCK position 6 times. Ensure 6th turning is done within one second. Remove valid 1st key.
- Using valid 2nd key, turn ignition to ON position. SECURITY light should illuminate for 1-2 seconds. Turn valid 2nd key to LOCK position and remove key.
- Using valid 1st key, start engine. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn valid 1st key to LOCK position and remove key.
- Repeat step 4 with additional valid key or new 3rd key. Repeat step 4 with each new key, up to 8 keys total. Wait 30 seconds, program will quit automatically.