Replacement Transmitter Battery

If the transmitter becomes unreliable, replace battery.

As the battery power is consumed, operation distance will be shorter.

1. Put edge of coin or flat blade screw driver in slot (1) of transmitter and pry open. See Fig 1 .
2. Replace battery (lithium disc-type CR2032 or equivalent) (2) so its "+" terminal faced the "+" mark of transmitter.
   CAUTION: Do not allow grease or dirt to be attached on printed circuit board and battery.
3. Close the transmitter firmly.
4. Make sure door locks can be operated with transmitter.
   NOTE: To prevent theft, be sure to break transmitter before discarding it.
   Dispose of used battery properly according to applicable rules or regulations. Do not dispose of lithium batteries with ordinary household trash.

Fig 1: Replacing Transmitter Battery

Courtesy of SUZUKI OF AMERICA CORP.