Ignition Cable: Service and Repair

HIGH-TENSION CORD




REMOVAL
1. Remove high-tension cord (2) from ignition coil assembly (1) while gripping its cap.
2. Pull out high-tension cord (2) from spark plug while gripping its cap.

CAUTION:
- Removal of high-tension cords together with clamps will be recommended so as to damage their inside wire (resistive conductor).
- For the same reason, pull out each connection by gripping cap portion.




INSTALLATION
Install high-tension cord (2) to spark plug and ignition coil assembly (1) while gripping its cap.

CAUTION:
- Never attempt to use metal conductor high-tension cord(s) as replacing parts.
- Insert each cap potion fully when installing high-tension cords.