DTC Confirmation Test
- Ensure intake air temperature is 6.8-158°F (-14-70°C), vehicle is at an altitude of 9150 feet or below, and barometric pressure is 74 kPa or more. Turn ignition off, connect scan tool and turn ignition on. Clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. Start engine and allow it to reach normal operating temperature. Drive vehicle at speeds of 25 MPH or more for 15 minutes.
- Stop vehicle. Check for DTCs P0442/P0445. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. If DTCs are not set, check completion status of evaporative system monitoring test in READINESS TESTS mode. If testing has not been completed, drive vehicle at speeds of 25 MPH or more for 15 minutes. Stop vehicle. Check for DTCs P0442/P0445. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM.