DTC P0157 Or DTC P0158: Condition

DTC P0157 is set when ECM (PCM) detects maximum HO2S B2 S2 voltage input is more than 0.5 volt for 4 seconds when fuel is cut. DTC P0158 is set when ECM (PCM) detects maximum HO2S B2 S2 voltage input is less than 0.35 volt , or more than 2 volts for 20 seconds. MIL is illuminated when ECM (PCM) detects malfunction during 2 consecutive drive cycles. Possible causes are:

• HO2S Bank 2, Sensor 2 malfunction.
• HO2S Bank 2, Sensor 2 circuit malfunction.
• Fuel injector malfunction.
• Fuel pressure control system malfunction.
• ECM (PCM) malfunction.
• Low fuel level.