DTC P0132 Or DTC P1132: Condition
DTC P0132 is set when maximum HO2S Bank 1, Sensor 1 output voltage is less than 0.6 volt or higher than 1.2 volts. DTC P1132 is set when HO2S voltage is higher than 2.0 volts even after engine running for specified time from engine start. MIL is illuminated when ECM (PCM) detects malfunction during 2 consecutive drive cycles. Possible causes are:
- HO2S Bank 1, Sensor 1 malfunction.
- HO2S Bank 1, Sensor 1 circuit malfunction.
- ECM (PCM) malfunction.
- Low fuel level.