DTC P0107 Or DTC P0108: Condition
DTC P0107 is set when MAP sensor output is less than 1.0 volt when engine is warmed up and running and throttle is opened larger than specification (high load condition). DTC P0108 is set when MAP sensor output is more than 2.7 volts when engine is warmed up and running and throttle is opened smaller than specification (low load condition). MIL is illuminated when ECM (PCM) detects malfunction during 2 consecutive drive cycles. Possible causes are:
- MAP sensor malfunction
- MAP sensor circuit malfunction
- ECM (PCM) malfunction