Diagnosis & Repair Procedure
- If engine system check has been performed, go to next step. If engine system check has not been performed, go to A4: ENGINE SYSTEM CHECK under SYSTEM TESTS.
- Turn ignition off. Check EVAP-CPV operation. See EVAP CANISTER PURGE VALVE under FUEL EVAPORATION in SYSTEM & COMPONENT TESTING article. If problem is found, replace EVAP-CPV. After repair, repeat DTC CONFIRMATION TEST . If no problem is found, go to next step.
- Check Fuel Tank Pressure (FTP) sensor. See FUEL TANK PRESSURE SENSOR under FUEL EVAPORATION in SYSTEM & COMPONENT TESTING article. If problem is found, replace FTP sensor. After repair, repeat DTC CONFIRMATION TEST . If no problem is found, go to next step.
- Check FTP control valve operation or for clog. See FUEL TANK PRESSURE CONTROL VALVE under FUEL EVAPORATION in SYSTEM & COMPONENT TESTING article. If problem is found, replace FTP control valve. If no problem is found, problem is probably intermittent. See INTERMITTENTS in TROUBLE SHOOTING - NO CODES article. If intermittent problem is not found, substitute a known good ECM and repeat DTC CONFIRMATION TEST . If DTC does not reset, testing is complete.