Diagnosis & Repair Procedure
- If engine system check has been performed, go to next step. If engine system check has not been performed, go to A4: ENGINE SYSTEM CHECK under SYSTEM TESTS.
- Check FTP sensor operation. See FUEL TANK PRESSURE SENSOR under EMISSION SYSTEMS & SUB-SYSTEMS in SYSTEM & COMPONENT TESTING article. If problem is found, replace FTP sensor. After repair, repeat DTC CONFIRMATION TEST . If FTP sensor is okay, go to next step.
- Check EVAP canister, EVAP canister air filter, EVAP canister air filter passage, and fuel vapor passage between fuel tank and EVAP canister for plugging. If problem is found, repair as necessary. After repair, repeat DTC CONFIRMATION TEST . If components are okay, problem is probably intermittent. See INTERMITTENTS in TROUBLE SHOOTING - NO CODES article. If intermittent problem is not found, go to next step.
- Substitute a known good ECM, and repeat DTC CONFIRMATION TEST . If DTC does not reset, testing is complete.