Assembly of Sub Assembly

Assembly





1. If input oil gutter has been removed, install it with bolt applied with thread lock cement.
"A": Thread lock 1322 99000-32110
Tightening torque
Oil gutter bolt (a): 10 Nm (1.0 kgf-m, 7.5 ft. lbs.)





2. Install differential side L oil seal (1) until it becomes flush with case surface by using special tool with hammer, and then apply grease to its lip.

NOTE: Face oil seal spring side inward.

"B": SUZUKI SUPER GREASE A 99000-25010
Special tool (A): 09913-75520
3. Install countershaft L bearing cup into case bore by tapping it with plastic hammer lightly.