Fluid - A/T: Service and Repair
A/T Fluid Change1. Lift up vehicle.
2. With engine is cool, remove drain plug (1) from oil pan and drain A/T fluid.
3. Install drain plug.
Tightening torque
Drain plug (a): 40 Nm (4.0 kgf-m, 29.0 ft. lbs.)
4. Lower vehicle and fill proper amount of an equivalent of DEXRON-III.
5. Check fluid level (5).
Fluid specification: An equivalent of DEXRON-III
A/T fluid capacity:
When draining from drain plug hole: 2.6 liters (5.49/4.57 US/Imp.pt.) When overhauling (for 1.6 liter model): 5.7 liters (12.04/10.03 US/Imp.pt.)
When overhauling (for 1.8 liter model): 5.9 liters (12.46/10.38 US/Imp.pt.)