Transmitter Battery Replacement

If the transmitter becomes unreliable, replace the battery.

As the battery power is consumed, the operation distance will be shorter.

1. Put the edge of a coin or flat blade screwdriver in slot (1) of transmitter and pry it open. See Fig 1 .
   Fig 1: Prying Transmitter Open

   Courtesy of SUZUKI OF AMERICA CORP.
2. Replace battery (lithium disc-type CR2032 or equivalent) so it (+) terminal faces "+" mark of transmitter.
   CAUTION: Do not allow grease or dirt to be attached on printed circuit board and battery.
3. Close transmitter firmly.
4. Make sure door locks can be operated with transmitter.
   NOTE: To prevent theft, be sure to break the transmitter before discarding.
   Dispose of used battery properly according to applicable rules or regulations. Do not dispose of lithium batteries with ordinary household trash.