Diagnosis & Repair Procedure
- If engine system check has been performed, go to next step. If engine system check has not been performed, go to A4: ENGINE SYSTEM CHECK under SYSTEM TESTS.
- Check for poor, loose, corroded or damaged terminal connections in all harness connectors between fuel gauge, fuel level sensor and ECM. Check for intermittent condition. See INTERMITTENTS in TROUBLE SHOOTING - NO CODES article. If no problem is found, go to next step. If problem is found, repair as necessary. After repair, repeat DTC CONFIRMATION TEST .
- Replace fuel level sensor. After repair, retest system. If problem still exist, substitute a known good ECM, and retest system. After repair, repeat DTC CONFIRMATION TEST . If DTC does not reset, testing is complete.