DTC Confirmation Test
- Turn ignition off, connect scan tool and turn ignition on. Using scan tool, clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. Ensure fuel tank is at least 1/4 full, vehicle is at an altitude of 8000 feet or below, barometric pressure is 75 kPa or more, ambient temperature is 14°F (-10°C) or more, and intake air temperature is 158°F (70°C) or less. Go to, next step.
- Start engine an allow it to reach 158-230°F (70-110°C). Allow engine to run for 5 minutes. Drive vehicle at speeds of 50-55 MPH in 5th gear (M/T) or Drive (A/T) for 2 minutes or more. Shift to 3rd gear (M/T) or 2nd (A/T) and rase engine speed to 4000 RPM. Release accelerator pedal, keep vehicle coasting until engine speed reaches 1500 RPM. Stop vehicle, leave ignition on and confirm test results. See TEST RESULT CONFIRMATION FLOW .