LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2002 >> Esteem GL, 4D Sedan, Standard >> Repair and Diagnosis >> Body & Frame >> Power Door Locks & Remote Keyless Entry System >> Circuit Tests >> Power Door Lock Actuator Circuit >> Models With RKE
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Models With RKE

  1. Disconnect negative battery cable. Disconnect PDL/RKE controller harness connector. See Figure . Connect negative battery cable.
  2. Using fused jumper wire, connect battery voltage to PDL/RKE controller connector terminal No. 1 (Yellow/Black wire). See Figure . Using a second jumper wire connected to ground, momentarily contact PDL/RKE controller connector terminal No. 3 (Yellow/Blue wire). Check driver's door power door lock is locked. If driver's door does not lock, check for an open or short in Yellow wire or Yellow/Blue wire between driver's door lock actuator and PDL/RKE controller connector. See WIRING DIAGRAMS  . If driver's door is locked, go to next step.
    NOTE: On models with RKE, Yellow/Blue wire from PDL/RKE controller connector terminal No. 3 changes color at in-line harness connector in driver's door to a Yellow wire at driver's door lock actuator connector. See WIRING DIAGRAMS  .
  3. Using grounded jumper wire, momentarily contact PDL/RKE controller connector terminal No. 2 (Yellow wire). See Figure . Check that all passenger door locks (except driver's door) are locked. If any passenger door lock does not lock, check for an open or short in Yellow wire or Yellow/Black wire between appropriate PDL/RKE controller connector and suspect power door lock actuator. See WIRING DIAGRAMS  . If all power door locks are locked, go to next step.
  4. Remove jumper wires. Using fused jumper wire, connect battery voltage to PDL/RKE controller connector terminals No. 2 (Yellow wire) and No. 3 (Yellow/Blue wire). See Figure . Using a jumper wire connected to ground, momentarily contact PDL/RKE connector terminal No. 1 (Yellow/Black wire). Check that all power door locks are unlocked. If any door lock actuator does not unlock, check for an open or short in Yellow wire, Yellow/Blue wire or Yellow/Black wire between suspect power door lock actuator and PDL/RKE controller connector. See WIRING DIAGRAMS  . If all power door locks are unlocked, power door lock actuator circuit is okay.
scientia non olet · About LEMON Manuals