Clutch Switch: Service and Repair

Clutch Pedal Position (CPP) Switch

Removal
1. Disconnect CPP switch connector with ignition switch OFF.




2. Remove CPP switch from pedal bracket.

Installation
1. Install CPP switch (2) to pedal bracket.
2. With clutch pedal (1) released, adjust switch position so that clearance between end of thread and clutch pedal bracket is within specification.

Clearance between end of thread and clutch pedal bracket "a": 1.5 - 2.0 mm (0.06 - 0.08 in.)




3. Tighten lock nut (3) to specified torque.
4. Connect connector to CPP switch securely.