Inspection

Brake Shoe and Lining





Where lining is worn out beyond service limit, replace shoe. If one of brake linings is worn to service limit, all linings must be replaced at the same time.
Brake shoe thickness "a" (lining + shoe rim)
Standard: 6.1 mm (0.24 inch)
Service limit: 2.8 mm (0.11 inch)

NOTE: Never polish lining with sandpaper. If lining is polished with sandpaper, hard particles of sandpaper will be deposited in lining and may damage drum. When it is required to correct lining, replace it with a new one.

Parking Shoe Lever





Inspect brake shoe lever for free movement against brake shoe web. If defective, correct or replace.

Brake Strut





Inspect ratchet of strut for wear or damage.

Springs





Inspect for damage or weakening. Inspect each part with arrow for rust. If found defective, replace.